Comments
-
Hello @TKWITS as per your instructions: Changed address obj. of public ip to WAN. removed Prefetch F.S. disabled Keepalives, No luck on tunnel coming up, on any of above changes. below is packet capture info generated, pinging into one of the remote VPN network IP- still am not sure if issue is on my side. for the dropped…
-
hello @TKWITS thank you for helping me, below are screen shots, hope it helps to eliminate my configuration issue with no help from remote site. ERROR: Notes in above: address objects below: (3 pic) My public ip address object. ( I put lAN, that ok:?) Remote Site B network address object. (pic#3) NAT POLICIES BELOW (3…
-
along with the errors the notes below ( if its any help) IKEv2 Received notify error payload. Notes: VPN Policy: from VPN1 to EOffice; No Proposal Chosen IKEv2 Initiator: Negotiations failed. Extra payloads present. Notes: VPN Policy: from VPN1 to EOffice; extra payloads present, failing negotiation.
-
@TKWITS thank you Also worried about the message: Inform: IKEv2 No NAT device detected between negotiating peers The forms with Phase 1 and 2 I checked it multiple times i have kept it the same as the one they gave me. Only one thing in form, i ignored and do not have idea is: Supports Key Exchange for Subnets= NO
-
Thank you @shiprasahu93 and @TKWITS I did config as per the @shiprasahu93 explicit instructions and also double checked with @TKWITS 2nd reply link and advice. I now get the following errors now. Not sure if something wrong in my side or remote, since i get no help from remote site. IKEv2 Initiator: Send IKE_SA_INIT…
-
Thank you TKWITS for the reply and link. I did go tru with the link you have sent, but i get messed up with the NAT policies. assuming Site B is my side: example. Site B: is currently 192.168.1.0 /24 want it mapped with my WAN public IP address 70.70.70.70/29 and also have to use IKEv2. Please guide.